This manifested itself in a couple places that were turning shared
memory buffers into slices for the purposes of passing these slices to
`Read` and `Write` trait methods.
However, this required the removal of the methods that took `Read` and
`Write` instances. This was a convenient interface but impossible to
implement safely because making slices from raw pointers without
enforcing safety guarantees causes undefined behaviour in Rust. It turns
out lots of code in crosvm was using these interfaces indirectly, which
explains why this CL touches so much.
TEST=crosvm run
BUG=chromium:938767
Change-Id: I4ff40c98da6ed08a4a42f4c31f0717f81b1c5863
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1636685
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Zach Reizner <zachr@chromium.org>
The --bios argument is added as an alternative to the kernel positional
argument. The BIOS runs in unreal mode (16-bit cs selector set to the
end of 32-bit address space), which matches the default state KVM puts
the segment and data registers into.
Example usage:
Build u-boot with "make qemu-x86_defconfig && make"
Run crosvm with "crosvm_wrapper.sh run --bios=u-boot.rom"
This produces the following message:
"""
U-Boot 2019.01-00017-gdc76aabe6a-dirty (May 21 2019 - 12:17:02 -0700)
CPU:
DRAM: 16 MiB
unable to get online cpu number: -19
Warning: MP init failure
Model: QEMU x86 (I440FX)
Net: No ethernet found.
error: can't find etc/table-loader
Hit any key to stop autoboot: 0
=>
"""
At this point the u-boot shell works with stdin/stdout, but virtual
disks passed with --rwdisk weren't immediately visible from running
"virtio scan" and "virtio info".
This change puts the bios loading together with the linux kernel loading
code since there is a lot of overlap in functionality.
Bug: b/133358982
Test: ./crosvm_wrapper.sh run --mem=4097 --bios=u-boot.rom
Change-Id: I65b0e1044233af662a642c592d35b106217f3c13
Reviewed-on: https://chromium-review.googlesource.com/1622648
Commit-Ready: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Fix an off by one in the loop range so that all 4 UARTs are initialized.
Note that the 4th serial port (/dev/ttyS3) still doesn't work in Linux;
this is because our UART doesn't correctly emulate the loopback mode,
which is tested by the Linux serial driver. This test is skipped for
the first three ports due to the UPF_SKIP_TEST flag in STD_COMX_FLAGS,
whereas STD_COM4_FLAGS does not set UPF_SKIP_TEST (and fails the test).
This will need to be resolved separately.
BUG=chromium:953983
TEST=`echo test > /dev/ttyS3` inside VM
Change-Id: Ic768584820e8b532ee4241df79ef8b9c17c4657a
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1620703
Tested-by: kokoro <noreply+kokoro@google.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Trent Begin <tbegin@chromium.org>
This matches behavior of other bootloaders (grub2, iPXE), and the kernel
seems to be relying on this; decompression of the initrd fails if the
initrd is loaded right after the kernel as before, but succeeds if
loaded at the maximum address.
BUG=None
TEST=Boot Debian kernel + initrd on workstation
Change-Id: If7712efb05f55ef413a419dfe276ed3f68c335b7
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1616989
Tested-by: kokoro <noreply+kokoro@google.com>
Legacy-Commit-Queue: Commit Bot <commit-bot@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
This change allows an output to be set for each serial device for a
guest machine (stdout, syslog, or sink).
BUG=chromium:953983
TEST=FEATURES=test emerge-sarien crosvm; cd sys_util; cargo test;
./build_test; manual testing on x86_64 and aarch_64
Change-Id: I9e7fcb0b296c0f8a5aa8d54b1a74ae801f6badc8
Reviewed-on: https://chromium-review.googlesource.com/1572813
Commit-Ready: Trent Begin <tbegin@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Trent Begin <tbegin@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Renames field memory_mb to memory_size. All usages of this
field treat it as a memory size in bytes, not megabytes.
BUG=None
TEST=cargo check
TEST=cargo check --package aarch64 --target aarch64-unknown-linux-gnu
Change-Id: I7b1aefe4f0b612d5eeb2987dc2a0fce6db0dd228
Reviewed-on: https://chromium-review.googlesource.com/1585617
Commit-Ready: Jakub Staroń <jstaron@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
AddressAllocator now maintains a HashMap<Alloc, (u64, u64, u64)>,
which uniquely maps a Allocation enum (e.g: PciBar(bus, dev, bar),
GpuRenderNode, etc...) to it's address, size, and human-readable tag
/ description.
The interface has also been modified to use Error instead of Option.
Aside from improving debugging, tracking allocations will have
numerous uses in the future. For example, when allocating guest memory
over VmControl sockets, it will be possible to restrict allocations to
pre-allocated slices of memory owned by the requesting device.
To plumb through PCI information to PCI devices, this CL necessitated
the addition of a PciDevice method called `assign_bus_dev`, which
notifies PCI devices of their uniquely assigned Bus and Device numbers.
BUG=chromium:936567
TEST=cargo test -p resources && cargo build --features="gpu gpu-forward"
Change-Id: I8b4b0e32c6f3168138739249ede53d03143ee5c3
Reviewed-on: https://chromium-review.googlesource.com/1536207
Commit-Ready: Daniel Prilik <prilik@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
In Rust 2018 edition, `extern crate` is no longer required for importing
from other crates. Instead of writing:
extern crate dep;
use dep::Thing;
we write:
use dep::Thing;
In this approach, macros are imported individually from the declaring
crate rather than through #[macro_use]. Before:
#[macro_use]
extern crate sys_util;
After:
use sys_util::{debug, error};
The only place that `extern crate` continues to be required is in
importing the compiler's proc_macro API into a procedural macro crate.
This will hopefully be fixed in a future Rust release.
extern crate proc_macro;
TEST=cargo check
TEST=cargo check --all-features
TEST=cargo check --target aarch64-unknown-linux-gnu
TEST=local kokoro
Change-Id: I0b43768c0d81f2a250b1959fb97ba35cbac56293
Reviewed-on: https://chromium-review.googlesource.com/1565302
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
This allows setting the affinity of the VCPU threads to specific host
CPUs. Note that each individual CPU has its affinity set to the full
set of CPUs specified, so the host kernel may still reschedule VCPU
threads on whichever host CPUs it sees fit (within the specified set).
BUG=chromium:909793
TEST=build_test
Change-Id: I09b893901caf91368b64f5329a6e9f39027fef23
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1554865
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
This may help reduce cases of conflicts between independent CLs each
appending a dependency at the bottom of the list, of which I hit two
today rebasing some of my open CLs.
TEST=cargo check --all-features
Change-Id: Ief10bb004cc7b44b107dc3841ce36c6b23632aed
Reviewed-on: https://chromium-review.googlesource.com/1557172
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Separated out of CL:1513058 to make it possible to land parts
individually while the affected crate has no other significant CLs
pending. This avoids repeatedly introducing non-textual conflicts with
new code that adds `use` statements.
TEST=cargo check
TEST=cargo check --all-features
TEST=cargo check --target aarch64-unknown-linux-gnu
Change-Id: Ia9d3297d0c8fd4b34cf6dfb203bb7e382a462579
Reviewed-on: https://chromium-review.googlesource.com/1519688
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
Found by running: `cargo rustc -- -D bare_trait_objects`
Bare trait objects like `&Trait` and `Box<Trait>` are soft-deprecated in
2018 edition and will start warning at some point.
As part of this, I replaced `Box<Trait + 'static>` with `Box<dyn Trait>`
because the 'static bound is implied for boxed trait objects.
TEST=cargo check --all-features
TEST=cargo check --target aarch64-unknown-linux-gnu
TEST=local kokoro
Change-Id: I41c4f13530bece8a34a8ed1c1afd7035b8f86f19
Reviewed-on: https://chromium-review.googlesource.com/1513059
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
Check for failures of the PciDevice register_device_capabilities
function. This fixes a build warning about ignoring a Result.
BUG=None
TEST=Boot Crostini on nami; cargo build without warnings
Change-Id: I48458a3a19a99a471d4c91c9761d35dc8dd2ef20
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1526329
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Prilik <prilik@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
virtio devices should be able to specify capabilities
BUG=chromium:936567
TEST=boot vm
Change-Id: I049f9967eb59a7904528fff5aea844e30c636e28
Reviewed-on: https://chromium-review.googlesource.com/1493012
Commit-Ready: Daniel Prilik <prilik@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Avoiding Box<dyn Error> makes it less likely that we display errors with
insufficient context by accident.
Many of the errors touched in this CL already had helpful message
written! But those corresponding enum variants were never being
instantiated, and that bug was masked by Box<dyn Error>. For example see
the Error::LoadCmdline and Error::LoadKernel.
pub enum Error {
LoadCmdline(kernel_loader::Error),
...
}
Before this CL:
// Bug: boxes the underlying error without adding LoadCmdline
kernel_loader::load_cmdline(...)?;
After this CL:
kernel_loader::load_cmdline(...).map_err(Error::LoadCmdline)?;
TEST=cargo check
TEST=cargo check --all-features
TEST=cargo check --target aarch64-unknown-linux-gnu
Change-Id: I7c0cff843c2211565226b9dfb4142ad6b7fa15ac
Reviewed-on: https://chromium-review.googlesource.com/1502112
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
The description method is deprecated and its signature forces less
helpful error messages than what Display can provide.
BUG=none
TEST=cargo check --all-features
TEST=cargo check --target aarch64-unknown-linux-gnu
Change-Id: I27fc99d59d0ef457c5273dc53e4c563ef439c2c0
Reviewed-on: https://chromium-review.googlesource.com/1497735
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Rename functions and parameters that had 'virtio' in their names
because we also create non-virtio devices like audio.
BUG=none
TEST=emerge-eve crosvm and deploy it to the device, verify some of
devices are still created at /sys/bus/virtio/devices/
Change-Id: I3ea75159a865e5f00ecef349725b3c12f94afaca
Signed-off-by: Jianxun Zhang <jianxun.zhang@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/1480739
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: David Tolnay <dtolnay@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Not sure if adding the device addresses to the mmio bus
is the desired behavior, but it seems to work.
BUG=chromium:924405
TEST=boot VM
Change-Id: I7f6057b3e7d041a52b251af1203353ba7a0d3c22
Reviewed-on: https://chromium-review.googlesource.com/1480743
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
I have been running into Debug-printed error messages too often and
needing to look up in the source code each level of nested errors to
find out from the comment on the error variant what the short name of
the variant means in human terms. Worse, many errors (like the one shown
below) already had error strings written but were being printed from the
calling code in the less helpful Debug representation anyway.
Before:
[ERROR:src/main.rs:705] The architecture failed to build the vm: NoVarEmpty
After:
[ERROR:src/main.rs:705] The architecture failed to build the vm: /var/empty doesn't exist, can't jail devices.
TEST=cargo check --all-features
TEST=FEATURES=test emerge-amd64-generic crosvm
Change-Id: I77122c7d6861b2d610de2fff718896918ab21e10
Reviewed-on: https://chromium-review.googlesource.com/1469225
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Based on Linux boot protocol references:
- x86: Documentation/x86/boot.txt
- arm: Documentation/devicetree/bindings/chosen.txt
BUG=None
TEST=Boot Alpine Linux netboot initrd on x86_64 and aarch64
Change-Id: If4730765638f0a0b8bb8f63203c98e4765a354ee
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1407221
Tested-by: kokoro <noreply+kokoro@google.com>
This device tree is derived from the Android fstab file which is
provided via command line flag.
BUG=chromium:922737
TEST=None
CQ-DEPEND=CL:1415390
CQ-DEPEND=CL:1415270
Change-Id: Idd007c844f84cab3ff37be16a718f14e5f630312
Reviewed-on: https://chromium-review.googlesource.com/1370058
Commit-Ready: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Each device (Bus, Pci, Proxy, etc), gets a debug label associated with
it. When a child is spawned, the debug label for it is stored in
a map with the child's pid as the key. If a SIGCHLD is handled, this map
is used to print a more helpful message about exactly which child died.
BUG=None
TEST=run with sandboxing and a faulty child device
check logs for message about child died
the child should have a debug label
Change-Id: I61fbbee0a8e701249533a7a3a6a1ad48840f12e5
Reviewed-on: https://chromium-review.googlesource.com/1432835
Commit-Ready: Chih-Yang Hsia <paulhsia@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Factor out the common parts of kernel loading code from x86_64 and
aarch64. This will be used to load initrds as well.
BUG=None
TEST=Boot termina on kevin
Change-Id: I0f61fdaf1067311d25393e8d64340f570f5a6ed7
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1407220
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
We updated the production toolchain from 1.30 to 1.31 in CL:1366446.
This CL does the same upgrade for the local developer toolchain and
Kokoro.
The relevant changes are in rust-toolchain and kokoro/Dockerfile.
The rest are from rustfmt.
TEST=cargo fmt --all -- --check
TEST=as described in kokoro/README.md
Change-Id: I3b4913f3e237baa36c664b4953be360c09efffd4
Reviewed-on: https://chromium-review.googlesource.com/1374376
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: David Tolnay <dtolnay@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
This CL adds a crate `sync` containing a type sync::Mutex which wraps
the standard library Mutex and mirrors the same methods, except that
they panic where the standard library would return a PoisonError. This
API codifies our error handling strategy around poisoned mutexes in
crosvm.
- Crosvm releases are built with panic=abort so poisoning never occurs.
A panic while a mutex is held (or ever) takes down the entire process.
Thus we would like for code not to have to consider the possibility of
poison.
- We could ask developers to always write `.lock().unwrap()` on a
standard library mutex. However, we would like to stigmatize the use
of unwrap. It is confusing to permit unwrap but only on mutex lock
results. During code review it may not always be obvious whether a
particular unwrap is unwrapping a mutex lock result or a different
error that should be handled in a more principled way.
Developers should feel free to use sync::Mutex anywhere in crosvm that
they would otherwise be using std::sync::Mutex.
TEST=boot linux
Change-Id: I9727b6f8fee439edb4a8d52cf19d59acf04d990f
Reviewed-on: https://chromium-review.googlesource.com/1359923
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Hopefully the changes are self-explanatory and uncontroversial. This
eliminates much of the noise from `cargo clippy` and, for my purposes,
gives me a reasonable way to use it as a tool when writing and reviewing
code.
Here is the Clippy invocation I was using:
cargo +nightly clippy -- -W clippy::correctness -A renamed_and_removed_lints -Aclippy::{blacklisted_name,borrowed_box,cast_lossless,cast_ptr_alignment,enum_variant_names,identity_op,if_same_then_else,mut_from_ref,needless_pass_by_value,new_without_default,new_without_default_derive,or_fun_call,ptr_arg,should_implement_trait,single_match,too_many_arguments,trivially_copy_pass_by_ref,unreadable_literal,unsafe_vector_initialization,useless_transmute}
TEST=cargo check --features wl-dmabuf,gpu,usb-emulation
TEST=boot linux
Change-Id: I55eb1b4a72beb2f762480e3333a921909314a0a2
Reviewed-on: https://chromium-review.googlesource.com/1356911
Commit-Ready: David Tolnay <dtolnay@chromium.org>
Tested-by: David Tolnay <dtolnay@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
All devices have been converted to PCI, so we don't need MmioDevice.
BUG=chromium:854766
TEST=Boot crosvm on kevin and verify virtio devices still work
Change-Id: Ib6400e15bdb2153d14795de3cb0bfbf1845a8891
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1281832
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Register the irqfd with resample support so that we can correctly
emulate level-triggered interrupts. This requires each PciDevice to
listen for interrupt_resample events and re-assert the IRQ eventfd if it
should still be active.
BUG=None
TEST=Boot crosvm on x86-64 and arm devices
Change-Id: I5cf8d1d1705cf675b453962c00d2d606801fee91
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1298654
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Make the Minijail part of the PCI device tuple optional so that an empty
jail is not created for --disable-sandbox.
BUG=None
TEST=Boot crosvm in both --multiprocess and --disable-sandbox modes
Change-Id: Ibb3f2dbf33ca19910ee7448ea823b2772e09ecc5
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1290289
Reviewed-by: Dylan Reid <dgreid@chromium.org>
This reverts commit c8986f14a8.
Re-land the virtio PCI conversion after the preceding fixes.
BUG=chromium:854766
TEST=Boot crosvm on nami and kevin
Change-Id: I3699e3ed1a45cecc99c51e352d0cf0c32bc4116f
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1265862
Reviewed-by: Dylan Reid <dgreid@chromium.org>
The virtio PCI spec (4.1.5.2 Notifying The Device) says:
"The driver notifies the device by writing the 16-bit virtqueue index
of this virtqueue to the Queue Notify address."
We were previously registering the notify address specifying
NoDatamatch; switch this to a 16-bit match of the queue index to follow
the specification.
BUG=chromium:854766
TEST=Boot crosvm with virtio devices converted to PCI
Change-Id: Ic950a8c7751268f7fcc21d5c37b0afc859f1e6d0
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1265861
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
This allows the caller to specify the full range of datamatch options
defined in the KVM ioeventfd API, including matching accesses of a
particular size with or without matching a specific data value.
BUG=None
TEST=cargo test -p kvm
Change-Id: I28b543f7c0b35eb2a6d47a14a33145ea00d09d1d
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1271836
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Now that cargo fmt has landed, run it over everything at once to bring
rust source to the standard formatting.
TEST=cargo test
BUG=None
Change-Id: Ic95a48725e5a40dcbd33ba6d5aef2bd01e91865b
Reviewed-on: https://chromium-review.googlesource.com/1259287
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
This reverts commit d635acbaf3.
This commit seems to be responsible for introducing hung tasks in tests,
so let's revert it for now to get the tests green and debug it offline.
BUG=chromium:891806
TEST=None
Change-Id: I83504058baeae00909d9fb4f4bb704a144a0dfaf
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1259408
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Change the main create_virtio_devs() function to create virtio devices
using the PCI transport rather than MMIO.
BUG=chromium:854766
TEST=Boot crosvm and verify that all virtio devices still work
Change-Id: I9a6e60b21edea1e5ac2b3ae5c91793d45cf5063a
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1241541
Reviewed-by: Dylan Reid <dgreid@chromium.org>
MPTABLE needs the PCI device number, not the IRQ; modify the information
passed via pci_irqs so that it contains a (device index, interrupt pin)
tuple.
Change-Id: Ia1dcb478cdab6654087925093ef9d1204edb21c9
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1237362
Reviewed-by: Dylan Reid <dgreid@chromium.org>
VirtioDevices and potentially others need to register ioeventfds that
will be triggered when guests write to certain addresses. Allow
PciDevices to return an array of ioeventfds that the VM can install.
Change-Id: I2524c4e8c04f75a8d7868cac998304aecbb29c40
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1237360
Commit-Ready: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: Daniel Verkamp <dverkamp@chromium.org>
PciDevice implementations will have file descriptors that need to be
preserved across the minijail fork.
Change-Id: I0b1f5b827b55c4d8960ffa95331b82f9c692f304
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1237359
Reviewed-by: Dylan Reid <dgreid@chromium.org>
passing everything in to the pci code is getting annoying. Instead build
it up in arch which already has access to all the needed resources.
Change-Id: If42f994443c4f11152fca8da16f27fa4cd80580d
Reviewed-on: https://chromium-review.googlesource.com/1237357
Commit-Ready: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
When setting up IO, accept an optional PciRoot device to put on the IO
bus.
For aarch64, it's currently ignored. For x86_64, it will be added at
0xcf8.
break up mmio device creation and registration
Moving forward registration will be handled by the architecture specific
code. However, creation will be handled by the common code. To make that
easier split up the two steps so a list of devices is created, then each
is registered later.
Start moving to a model where the configuration generates a set of
components that are passed to the architecture. The architecture will
crate a VM from the components.
Break up the big run_config function and move architecture specific
parts to the various architectures.
This doesn't refactor the function calls each architecture makes, but
moves the setup flow in to the arch impls so that they can diverge in
the future.
Change-Id: I5b10d092896606796dc0c9afc5e34a1b288b867b
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1099860
Commit-Ready: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: Daniel Verkamp <dverkamp@chromium.org>
PCI devices will require interrupts, allow this by passing a vector of
IRQs to the mptable so the guest kernel can find the IRQs.
Change-Id: I9fa8a2ed0a34089e631441570521082ffde9c4ef
Reviewed-on: https://chromium-review.googlesource.com/1072578
Commit-Ready: Dylan Reid <dgreid@chromium.org>
Tested-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Combine GPU buffer allocation with the system resource allocator making
life easier as only one allocator needs to get passed to the execute
function.
Change-Id: I199eb0fd6b99b629aaec1ae3295e8a1942da5309
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1099856
Allow IRQs to be assigned before creating device manager.
For PCI, we need to add devices with interrupts before MMIO setup. Add
the ability to tell the architecture device manager about IRQs that we
have stolen.
There was only one function in device_manager and all of its state is
now delegated to the resource allocator, remove it.
Change-Id: I9afa0e3081a20cb024551ef18ae34fe76a1ef39d
Reviewed-on: https://chromium-review.googlesource.com/1089720
Commit-Ready: Dylan Reid <dgreid@chromium.org>
Tested-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Sonny Rao <sonnyrao@chromium.org>
This fixes an issue on kevin where if we start on a little core, the
kernel doesn't like the generic ARMv8 target cpu type for some reason. To
fix this we must query the preferred type from the vm device first and
supply that to the vcpu init ioctl.
We need to change the signature of the configure_vcpu method to pass
in the vm object even though we aren't using it on x86.
BUG=chromium:797868
TEST=./build_test passes on all architectures
TEST=crosvm runs on kevin
Change-Id: I460cb9db62a8805bb88f838956aa4f1c69183961
Reviewed-on: https://chromium-review.googlesource.com/982996
Commit-Ready: Sonny Rao <sonnyrao@chromium.org>
Tested-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
This creates a trait that different architectures can implement to
support running Linux VMs.
In the implementation on X86 we remove some error and return errors
from lower-level modules as appropriate. These modules now implement
the Error trait so we can get meaningful descriptions without an extra
error from the calling function. This still keeps all the ifdefs in
linux.rs for now until we have another implementation to use for ARM.
BUG=chromium:797868
TEST=./build_test passes on all architectures
TEST=crosvm runs on caroline
Change-Id: If24bcc83e25f9127d6aea68f9272e639296aad8b
Reviewed-on: https://chromium-review.googlesource.com/952368
Commit-Ready: Sonny Rao <sonnyrao@chromium.org>
Tested-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
