IntoTemplate will be cleaned up later. Perhaps, the lifetime parameter can be
removed at this point, but I'm planning to remove the IntoTemplate trait at all.
The type parameter 'C' will be removed from the Template trait, making it
represent a printable type or compiled template.
TemplateRenderer now holds Box<dyn _> template because it's unlikely that the
inner template type can be statically determined.
This fixes --change/--branch conflicts by making --change precede --branch. I
don't think this is the most obvious behavior, but it's the easiest workaround.
It could be moved before set_local_branch_target() to not update the local
branch, but it seemed weird that --change is silently ignored. This
inconsistency will be addressed later.
This helps to implement CommandError::add_hint(). The inner errors could be
embedded in the enum as before, but they're mostly of the same type. And I think
it's okay to use downcast_ref() to deal with the clap::Error special case.
I'm going to reorganize CommandError as (kind, err, hints) tuple so that we
can add_hint() to the constructed error object.
Some config error messages are slightly adjusted because the inner error is
now printed in separate line.
I think Option<Commit> is the simplest encoding of the log node.
The behavior of an Option type is closer to nullable types rather than the
Option in Rust. I don't think we would want to write opt.map(|x| x.f()) or
opt.unwrap().f(). We can of course add opt?.f() syntax, but it will be a short
for "if(opt, opt.f())"?
As requested in #1471, I added a new flag for `jj branch list` to only show branches that are conflicted.
Adds a unit test to check for listing only conflicted branches and regenerates the cli output to incorporate the new flag.
Closes#1471
reformat
These two are common when implementing methods. Fortunately, the
"return-position impl Trait in traits" feature is stabilized in Rust 1.75.0,
so we don't need another variant of TemplateFunction.
Apart from (IMO) looking nicer, this will also sidestep the potential problem
that if the file contains actual jj conflict markers (`>>>>>>>` in the beginning
of a line, for example), jj would currently have trouble materializing and
subsequently parsing conflicts in the file if it actually became conflicted.
I'll demo this bug in either this or a subsequent PR. It's the kind of bug that
sounds serious in theory but might never cause a problem in practice.
After this PR, only `docs/tutorial.md` has a conflict marker that's not indented.
There's only one there, so hopefully it won't be too much of a pain to deal with.
I also indented other strings in `test_conflicts.rs`. IMO, this looks nice and
more consistent with the `insta::assert_snapshot` output. I didn't spend the
time to do the same for `test_resolve_command`.
Now a compiled template doesn't have a static Context type internally. A
property is basically of "Fn() -> Result<O, _>" type, and a type-erased "self"
variable will be injected as needed.
Template<C> types will be refactored separately.
In short, this enables compilation of template of e.g. Vec<Commit> type by
using CommitTemplateLanguage.
A Template<C> was originally compiled for a specific type C, and invoked as
"Fn(&C) -> _". It was simple and intuitive, but we had to define the context
type C statically. Things got even worse by extensions support because we had
to provide object-safe hook point for each context type C.
This patch basically removes the Context type from compiled templates. The
"self" variable is injected through RefCell<Option<C>> placeholder. A compiled
template knows its "self" type, but the type can be decided per instance, not
per TemplateLanguage type. A drawback is that the "self" variable will have to
be cloned one more time.
The Template<C> abstraction no longer makes sense, and will be split to inner
Template<()> implementations (which usually represent printable types) and the
outer Template<C>.
The idea is basically the same as list.map(|x| ...) template. It compiles the
inner template with a placeholder variable of type 'C', and evaluate it for
each instance variable by injecting the variable through RefCell.
Because GenericTemplateLanguage doesn't support any global resources, it no
longer makes sense to pass the language instance around to 0-ary keyword
functions.
These .wrap_<type>() functions aren't supposed to capture resources from the
language instance. It was convenient that wrap_() could be called without fully
spelling the language type, but doing that would introduce lifetime issue in
later patches.
I added type alias L to several places because the language type is usually
called L in generic code.
As discussed in #2900, the milliseconds are rarely useful, and it can
be confusing with different timezones because it makes harder to
compare timestamps.
I added an environment variable to control the timestamp in a
cross-platform way. I didn't document because it exists only for tests
(like `JJ_RANDOMNESS_SEED`).
Closes#2900
Changes the formatter to accept not only existing color names (such as "red" or
"green") but also those in the form #rrggbb, where rr, gg, and bb are two-digit
hexadecimal numbers. This allows much finer control over colors used.
"-r REVISIONS" here specifies the search space of the branches to push, and
warned if no branches are found in that space. I don't think an empty set
should be an error, but a warning for consistency. The warning message will be
improved by the subsequent patches.
This command belongs to the same category as "duplicate".
We might want a plural version of resolve_revset(), but I'm not sure whether
it should return Vec<Commit> or Revset. Let's revisit it later when we get
more callers.
Suppose we have an alias 'immutable()' = '::immutable_heads()', user can
express (visible) mutable set as '~immutable()'. 'immutable_heads()..' can
terminate early, but a generic difference 'all() & ~immutable()' can't.
Suppose the generation value is usually small, it should be faster to do
bounded range look up first 'y-', then walk ancestors with the unwanted set
'y-..x'.
There's a subtle behavior change that an empty revset is no longer rejected
individually, but I think that's good for "jj duplicate".
cmd_duplicate() was the last caller of index.topo_order().
When an operation is missing and we recover the workspace, we create a
new working-copy commit on top of the desired working-copy commit (per
the available head operation). We then reset the working copy to an
empty tree because it shouldn't really matter much which commit we
reset to. However, when the workspace is sparse, it does matter, as
the test case from the previous patch shows. This patch fixes it by
replacing the `reset_to_empty()` method by a new `recover(&Commit)`,
which effectively resets to the empty tree and then resets to the
commit. That way, any subsequent snapshotting will result keep the
paths from that tree for paths outside the sparse patterns.
As shown by the updated test case, when we recover from a working copy
pointing to a lost operation, the new working-copy commit after
snapshotting will have lost any files outside the sparse patterns.
AST substitution is technically closer to parsing, but the parsed expression
can be modified further by caller. So I think it's better to do optimize() in
later pass.
revset_util::parse() is inlined.
Spotted while moving revset::optimize() around. Since we don't include the
parsing cost of the target expression, we shouldn't include parsing/evaluation
cost of the short-prefixes either. The IdPrefixContext is currently populated
by WorkspaceCommandHelper::new(), but it's hard to tell.
The original plan was to extend the globals table to implement "revset(expr)".
I'm not sure if that's more discoverable than "self.contained_in(revset_expr)"
method, but we can decide that later. Anyways, this patch adds typo suggestion
for global functions.
Prepares for migrating to table-based lookup. It's unlikely that the
implementor handles global function calls differently, but the core doesn't
have an access to the customized symbol table.
This is preparation for #3292, which will use these functions. The main
goal is to merge the parts of #3292 that are likely to cause merge
conflicts with other PRs while I polish it up.
This will be reused for integration with the new `:builtin-web` diff editor in #3292.
`instructions-path_to_cleanup` is moved into DiffWorkingCopies.
DiffWorkingCopies: add instructions_path_to_cleanup
This change updates the language of `jj edit`'s help message to be
more clear as to the nature of the command. It also adds a
recommendation for a more idiomatic/safer workflow.
I just wanted to remove CommandError from parse_immutable_expression(), which
will be called from the templater, but the new error message looks also better.
Some of them will be called directly from the commit templater which shouldn't
know WorkspaceCommandHelper. All parameters are passed as function arguments
instead of having a nicer wrapper struct. That's because some resources (e.g.
repo and id prefix context) are also used for different purposes, and it seemed
uneasy to introduce high-level abstraction satisfying all the use cases.
Now you can do e.g. `jj squash --from 'foo+::' --into foo` to squash a
whole series into one commit. It doesn't need to be linear; you can
squash a bunch of siblings into another siblings, for example.
Now as default and elided node symbols come from the config, the next logical
step is to use them directly bypassing GraphLog. Note that commands like `jj op
log` and `jj obslog` do not use the elided node symbol at all.
This was proposed by @Brixy in
https://github.com/martinvonz/jj/discussions/2882 a while ago. There
seems to be pretty strong consensus that it's a good idea.
I've copied the added test cases from `test_move_command.rs`, just
replacing `move` by `squash`, `--to` by `--into`, and deleting the
test of a no-arg invocation (`jj move` fails, `jj squash` does not -
it defaults to squashing into the parent).
This patch makes `jj squash` us the helper I just extracted from `jj
move`. I had a to add a few small features to it for that.
The `test_squash_command.rs` test changed in a few cases where we do a
partial squash. After this patch, we include the rebased child in the
count of rebased descendants. That seems reasonable and consistent
with partial squash/move further than 1 generation.
This is just a little step towards reusing the helper I just extracted
from `jj move`. I had to update `test_immutable_commits.rs` because it
would otherwise fail because of the merge rather than failing because
of the immutable commit.
I'm soon going to make `jj squash` accept either `-r` or
`--from/--to`, which means `-r` will then be optional. This patch
prepares for that already, since it also simplifies the code a little
(and improves it so we warn if the user does `jj squash -r @
nonexistent`).
This matches what we do for `jj squash`, whether it's a
full or partial move.
I didn't add a test since we're planning to deprecate `jj move`, and
this will soon be tested via the `jj squash` tests.
The `destination` variable we use when creating the operation log may
have been replaced earlier in the code. I think this was a regression
when I moved the setting of the description from `start_transaction()`
to `finish_transaction()` a while ago.
We haven't used custom Git commit headers for two main reasons:
1. I don't want commits created by jj to be different from any other
commits. I don't want Git projects to get annoyed by such commit
and reject them.
2. I've been concerned that tools don't know how to handle such
headers, perhaps even resulting in crashes.
The first argument doesn't apply to commits with conflicts because
such commits would never be accepted by a project whether or not they
use custom commit headers. The second argument is less relevant for
conflicted commits because most tools will be confused by such commits
anyway.
Storing conflict information in commit headers means that we can
transfer them via the regular Git wire protocol. We already include
the tree objects nested inside the root-level tree, so they will also
be transferred.
So, let's start by writing the information redundantly to the commit
header and to the existing storage. That way we can roll it back if we
realize there's a problem with using commit headers.
