// Copyright 2023 The Jujutsu Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// https://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

use indoc::indoc;

use crate::common::TestEnvironment;

#[test]
fn test_snapshot_large_file() {
    let test_env = TestEnvironment::default();
    test_env.jj_cmd_ok(test_env.env_root(), &["git", "init", "repo"]);
    let repo_path = test_env.env_root().join("repo");

    // test a small file using raw-integer-literal syntax, which is interpreted
    // in bytes
    test_env.add_config(r#"snapshot.max-new-file-size = 10"#);
    std::fs::write(repo_path.join("empty"), "").unwrap();
    std::fs::write(repo_path.join("large"), "a lot of text").unwrap();
    let (stdout, stderr) = test_env.jj_cmd_ok(&repo_path, &["file", "list"]);
    insta::assert_snapshot!(stdout, @"empty");
    insta::assert_snapshot!(stderr, @r"
    Warning: Refused to snapshot some files:
      large: 13.0B (13 bytes); the maximum size allowed is 10.0B (10 bytes)
    Hint: This is to prevent large files from being added by accident. You can fix this by:
      - Adding the file to `.gitignore`
      - Run `jj config set --repo snapshot.max-new-file-size 13`
        This will increase the maximum file size allowed for new files, in this repository only.
      - Run `jj --config snapshot.max-new-file-size=13 st`
        This will increase the maximum file size allowed for new files, for this command only.
    ");

    // test with a larger file using 'KB' human-readable syntax
    test_env.add_config(r#"snapshot.max-new-file-size = "10KB""#);
    let big_string = vec![0; 1024 * 11];
    std::fs::write(repo_path.join("large"), big_string).unwrap();
    let (stdout, stderr) = test_env.jj_cmd_ok(&repo_path, &["file", "list"]);
    insta::assert_snapshot!(stdout, @"empty");
    insta::assert_snapshot!(stderr, @r"
    Warning: Refused to snapshot some files:
      large: 11.0KiB (11264 bytes); the maximum size allowed is 10.0KiB (10240 bytes)
    Hint: This is to prevent large files from being added by accident. You can fix this by:
      - Adding the file to `.gitignore`
      - Run `jj config set --repo snapshot.max-new-file-size 11264`
        This will increase the maximum file size allowed for new files, in this repository only.
      - Run `jj --config snapshot.max-new-file-size=11264 st`
        This will increase the maximum file size allowed for new files, for this command only.
    ");

    // test invalid configuration
    let stderr = test_env.jj_cmd_failure(
        &repo_path,
        &["file", "list", "--config=snapshot.max-new-file-size=[]"],
    );
    insta::assert_snapshot!(stderr, @r"
    Config error: Invalid type or value for snapshot.max-new-file-size
    Caused by: Expected a positive integer or a string in '<number><unit>' form
    For help, see https://jj-vcs.github.io/jj/latest/config/.
    ");

    // No error if we disable auto-tracking of the path
    test_env.add_config(r#"snapshot.auto-track = 'none()'"#);
    let (stdout, stderr) = test_env.jj_cmd_ok(&repo_path, &["file", "list"]);
    insta::assert_snapshot!(stdout, @"empty");
    insta::assert_snapshot!(stderr, @"");
}

#[test]
fn test_snapshot_large_file_restore() {
    let test_env = TestEnvironment::default();
    test_env.jj_cmd_ok(test_env.env_root(), &["git", "init", "repo"]);
    let repo_path = test_env.env_root().join("repo");
    test_env.add_config("snapshot.max-new-file-size = 10");

    test_env.jj_cmd_ok(&repo_path, &["describe", "-mcommitted"]);
    std::fs::write(repo_path.join("file"), "small").unwrap();

    // Write a large file in the working copy, restore it from a commit. The
    // working-copy content shouldn't be overwritten.
    test_env.jj_cmd_ok(&repo_path, &["new", "root()"]);
    std::fs::write(repo_path.join("file"), "a lot of text").unwrap();
    let (_stdout, stderr) =
        test_env.jj_cmd_ok(&repo_path, &["restore", "--from=description(committed)"]);
    insta::assert_snapshot!(stderr, @r"
    Warning: Refused to snapshot some files:
      file: 13.0B (13 bytes); the maximum size allowed is 10.0B (10 bytes)
    Hint: This is to prevent large files from being added by accident. You can fix this by:
      - Adding the file to `.gitignore`
      - Run `jj config set --repo snapshot.max-new-file-size 13`
        This will increase the maximum file size allowed for new files, in this repository only.
      - Run `jj --config snapshot.max-new-file-size=13 st`
        This will increase the maximum file size allowed for new files, for this command only.
    Created kkmpptxz e3eb7e81 (no description set)
    Working copy now at: kkmpptxz e3eb7e81 (no description set)
    Parent commit      : zzzzzzzz 00000000 (empty) (no description set)
    Added 1 files, modified 0 files, removed 0 files
    Warning: 1 of those updates were skipped because there were conflicting changes in the working copy.
    Hint: Inspect the changes compared to the intended target with `jj diff --from e3eb7e819de5`.
    Discard the conflicting changes with `jj restore --from e3eb7e819de5`.
    ");
    insta::assert_snapshot!(
        std::fs::read_to_string(repo_path.join("file")).unwrap(),
        @"a lot of text");

    // However, the next command will snapshot the large file because it is now
    // tracked. TODO: Should we remember the untracked state?
    let (stdout, stderr) = test_env.jj_cmd_ok(&repo_path, &["status"]);
    insta::assert_snapshot!(stdout, @r"
    Working copy changes:
    A file
    Working copy : kkmpptxz b75eed09 (no description set)
    Parent commit: zzzzzzzz 00000000 (empty) (no description set)
    ");
    insta::assert_snapshot!(stderr, @"");
}

#[test]
fn test_materialize_and_snapshot_different_conflict_markers() {
    let test_env = TestEnvironment::default();
    test_env.jj_cmd_ok(test_env.env_root(), &["git", "init", "repo"]);
    let repo_path = test_env.env_root().join("repo");

    // Configure to use Git-style conflict markers
    test_env.add_config(r#"ui.conflict-marker-style = "git""#);

    // Create a conflict in the working copy
    let conflict_file = repo_path.join("file");
    std::fs::write(
        &conflict_file,
        indoc! {"
            line 1
            line 2
            line 3
        "},
    )
    .unwrap();
    test_env.jj_cmd_ok(&repo_path, &["commit", "-m", "base"]);
    std::fs::write(
        &conflict_file,
        indoc! {"
            line 1
            line 2 - a
            line 3
        "},
    )
    .unwrap();
    test_env.jj_cmd_ok(&repo_path, &["commit", "-m", "side-a"]);
    test_env.jj_cmd_ok(&repo_path, &["new", "description(base)", "-m", "side-b"]);
    std::fs::write(
        &conflict_file,
        indoc! {"
            line 1
            line 2 - b
            line 3 - b
        "},
    )
    .unwrap();
    test_env.jj_cmd_ok(
        &repo_path,
        &["new", "description(side-a)", "description(side-b)"],
    );

    // File should have Git-style conflict markers
    insta::assert_snapshot!(std::fs::read_to_string(&conflict_file).unwrap(), @r##"
    line 1
    <<<<<<< Side #1 (Conflict 1 of 1)
    line 2 - a
    line 3
    ||||||| Base
    line 2
    line 3
    =======
    line 2 - b
    line 3 - b
    >>>>>>> Side #2 (Conflict 1 of 1 ends)
    "##);

    // Configure to use JJ-style "snapshot" conflict markers
    test_env.add_config(r#"ui.conflict-marker-style = "snapshot""#);

    // Update the conflict, still using Git-style conflict markers
    std::fs::write(
        &conflict_file,
        indoc! {"
            line 1
            <<<<<<<
            line 2 - a
            line 3 - a
            |||||||
            line 2
            line 3
            =======
            line 2 - b
            line 3 - b
            >>>>>>>
        "},
    )
    .unwrap();

    // Git-style markers should be parsed, then rendered with new config
    insta::assert_snapshot!(test_env.jj_cmd_success(&repo_path, &["diff", "--git"]), @r##"
    diff --git a/file b/file
    --- a/file
    +++ b/file
    @@ -2,7 +2,7 @@
     <<<<<<< Conflict 1 of 1
     +++++++ Contents of side #1
     line 2 - a
    -line 3
    +line 3 - a
     ------- Contents of base
     line 2
     line 3
    "##);
}

#[test]
fn test_snapshot_invalid_ignore_pattern() {
    let test_env = TestEnvironment::default();
    test_env.jj_cmd_ok(test_env.env_root(), &["git", "init", "repo"]);
    let repo_path = test_env.env_root().join("repo");
    let gitignore_path = repo_path.join(".gitignore");

    // Test invalid pattern in .gitignore
    std::fs::write(&gitignore_path, " []\n").unwrap();
    insta::assert_snapshot!(test_env.jj_cmd_internal_error(&repo_path, &["st"]), @r#"
    Internal error: Failed to snapshot the working copy
    Caused by:
    1: Failed to parse ignore patterns from file $TEST_ENV/repo/.gitignore
    2: error parsing glob ' []': unclosed character class; missing ']'
    "#);

    // Test invalid UTF-8 in .gitignore
    std::fs::write(&gitignore_path, b"\xff\n").unwrap();
    insta::assert_snapshot!(test_env.jj_cmd_internal_error(&repo_path, &["st"]), @r##"
    Internal error: Failed to snapshot the working copy
    Caused by:
    1: Invalid UTF-8 for ignore pattern in $TEST_ENV/repo/.gitignore on line #1: �
    2: invalid utf-8 sequence of 1 bytes from index 0
    "##);
}