make-dfsg/expand.c

/* Variable expansion functions for GNU Make.
Copyright (C) 1988, 89, 91, 92, 93, 95 Free Software Foundation, Inc.
This file is part of GNU Make.

GNU Make is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.

GNU Make is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Make; see the file COPYING.  If not, write to
the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.  */

#include "make.h"

#include <assert.h>

#include "filedef.h"
#include "job.h"
#include "commands.h"
#include "variable.h"
#include "rule.h"

/* The next two describe the variable output buffer.
   This buffer is used to hold the variable-expansion of a line of the
   makefile.  It is made bigger with realloc whenever it is too small.
   variable_buffer_length is the size currently allocated.
   variable_buffer is the address of the buffer.

   For efficiency, it's guaranteed that the buffer will always have
   VARIABLE_BUFFER_ZONE extra bytes allocated.  This allows you to add a few
   extra chars without having to call a function.  Note you should never use
   these bytes unless you're _sure_ you have room (you know when the buffer
   length was last checked.  */

#define VARIABLE_BUFFER_ZONE    5

static unsigned int variable_buffer_length;
char *variable_buffer;

/* Subroutine of variable_expand and friends:
   The text to add is LENGTH chars starting at STRING to the variable_buffer.
   The text is added to the buffer at PTR, and the updated pointer into
   the buffer is returned as the value.  Thus, the value returned by
   each call to variable_buffer_output should be the first argument to
   the following call.  */

char *
variable_buffer_output (char *ptr, char *string, unsigned int length)
{
  register unsigned int newlen = length + (ptr - variable_buffer);

  if ((newlen + VARIABLE_BUFFER_ZONE) > variable_buffer_length)
    {
      unsigned int offset = ptr - variable_buffer;
      variable_buffer_length = (newlen + 100 > 2 * variable_buffer_length
				? newlen + 100
				: 2 * variable_buffer_length);
      variable_buffer = (char *) xrealloc (variable_buffer,
					   variable_buffer_length);
      ptr = variable_buffer + offset;
    }

  bcopy (string, ptr, length);
  return ptr + length;
}

/* Return a pointer to the beginning of the variable buffer.  */

static char *
initialize_variable_output (void)
{
  /* If we don't have a variable output buffer yet, get one.  */

  if (variable_buffer == 0)
    {
      variable_buffer_length = 200;
      variable_buffer = (char *) xmalloc (variable_buffer_length);
      variable_buffer[0] = '\0';
    }

  return variable_buffer;
}

/* Recursively expand V.  The returned string is malloc'd.  */

static char *allocated_variable_append PARAMS ((const struct variable *v));

char *
recursively_expand_for_file (struct variable *v, struct file *file)
{
  char *value;
  struct variable_set_list *save = 0;
  int set_reading = 0;

  if (v->expanding)
    {
      if (!v->exp_count)
        /* Expanding V causes infinite recursion.  Lose.  */
        fatal (reading_file,
               _("Recursive variable `%s' references itself (eventually)"),
               v->name);
      --v->exp_count;
    }

  if (file)
    {
      save = current_variable_set_list;
      current_variable_set_list = file->variables;
    }

  /* If we have no other file-reading context, use the variable's context. */
  if (!reading_file)
    {
      set_reading = 1;
      reading_file = &v->fileinfo;
    }

  v->expanding = 1;
  if (v->append)
    value = allocated_variable_append (v);
  else
    value = allocated_variable_expand (v->value);
  v->expanding = 0;

  if (set_reading)
    reading_file = 0;
  if (file)
    current_variable_set_list = save;

  return value;
}

/* Expand a simple reference to variable NAME, which is LENGTH chars long.  */

#ifdef __GNUC__
__inline
#endif
static char *
reference_variable (char *o, char *name, unsigned int length)
{
  register struct variable *v;
  char *value;

  v = lookup_variable (name, length);

  if (v == 0)
    warn_undefined (name, length);

  /* If there's no variable by that name or it has no value, stop now.  */
  if (v == 0 || (*v->value == '\0' && !v->append))
    return o;

  value = (v->recursive ? recursively_expand (v) : v->value);

  o = variable_buffer_output (o, value, strlen (value));

  if (v->recursive)
    free (value);

  return o;
}

/* Scan STRING for variable references and expansion-function calls.  Only
   LENGTH bytes of STRING are actually scanned.  If LENGTH is -1, scan until
   a null byte is found.

   Write the results to LINE, which must point into `variable_buffer'.  If
   LINE is NULL, start at the beginning of the buffer.
   Return a pointer to LINE, or to the beginning of the buffer if LINE is
   NULL.  */

char *
variable_expand_string (char *line, char *string, long length)
{
  register struct variable *v;
  register char *p, *o, *p1;
  char save_char = '\0';
  unsigned int line_offset;

  if (!line)
    line = initialize_variable_output();

  p = string;
  o = line;
  line_offset = line - variable_buffer;

  if (length >= 0)
    {
      save_char = string[length];
      string[length] = '\0';
    }

  while (1)
    {
      /* Copy all following uninteresting chars all at once to the
         variable output buffer, and skip them.  Uninteresting chars end
	 at the next $ or the end of the input.  */

      p1 = strchr (p, '$');

      o = variable_buffer_output (o, p, p1 != 0 ? p1 - p : strlen (p) + 1);

      if (p1 == 0)
	break;
      p = p1 + 1;

      /* Dispatch on the char that follows the $.  */

      switch (*p)
	{
	case '$':
	  /* $$ seen means output one $ to the variable output buffer.  */
	  o = variable_buffer_output (o, p, 1);
	  break;

	case '(':
	case '{':
	  /* $(...) or ${...} is the general case of substitution.  */
	  {
	    char openparen = *p;
	    char closeparen = (openparen == '(') ? ')' : '}';
	    register char *beg = p + 1;
	    int free_beg = 0;
	    char *op, *begp;
	    char *end, *colon;

	    op = o;
	    begp = p;
	    if (handle_function (&op, &begp))
	      {
		o = op;
		p = begp;
		break;
	      }

	    /* Is there a variable reference inside the parens or braces?
	       If so, expand it before expanding the entire reference.  */

	    end = strchr (beg, closeparen);
	    if (end == 0)
              /* Unterminated variable reference.  */
              fatal (reading_file, _("unterminated variable reference"));
	    p1 = lindex (beg, end, '$');
	    if (p1 != 0)
	      {
		/* BEG now points past the opening paren or brace.
		   Count parens or braces until it is matched.  */
		int count = 0;
		for (p = beg; *p != '\0'; ++p)
		  {
		    if (*p == openparen)
		      ++count;
		    else if (*p == closeparen && --count < 0)
		      break;
		  }
		/* If COUNT is >= 0, there were unmatched opening parens
		   or braces, so we go to the simple case of a variable name
		   such as `$($(a)'.  */
		if (count < 0)
		  {
		    beg = expand_argument (beg, p); /* Expand the name.  */
		    free_beg = 1; /* Remember to free BEG when finished.  */
		    end = strchr (beg, '\0');
		  }
	      }
	    else
	      /* Advance P to the end of this reference.  After we are
                 finished expanding this one, P will be incremented to
                 continue the scan.  */
	      p = end;

	    /* This is not a reference to a built-in function and
	       any variable references inside are now expanded.
	       Is the resultant text a substitution reference?  */

	    colon = lindex (beg, end, ':');
	    if (colon)
	      {
		/* This looks like a substitution reference: $(FOO:A=B).  */
		char *subst_beg, *subst_end, *replace_beg, *replace_end;

		subst_beg = colon + 1;
		subst_end = lindex (subst_beg, end, '=');
		if (subst_end == 0)
		  /* There is no = in sight.  Punt on the substitution
		     reference and treat this as a variable name containing
		     a colon, in the code below.  */
		  colon = 0;
		else
		  {
		    replace_beg = subst_end + 1;
		    replace_end = end;

		    /* Extract the variable name before the colon
		       and look up that variable.  */
		    v = lookup_variable (beg, colon - beg);
		    if (v == 0)
		      warn_undefined (beg, colon - beg);

                    /* If the variable is not empty, perform the
                       substitution.  */
		    if (v != 0 && *v->value != '\0')
		      {
			char *pattern, *replace, *ppercent, *rpercent;
			char *value = (v->recursive
                                       ? recursively_expand (v)
				       : v->value);

                        /* Copy the pattern and the replacement.  Add in an
                           extra % at the beginning to use in case there
                           isn't one in the pattern.  */
                        pattern = (char *) alloca (subst_end - subst_beg + 2);
                        *(pattern++) = '%';
                        bcopy (subst_beg, pattern, subst_end - subst_beg);
                        pattern[subst_end - subst_beg] = '\0';

                        replace = (char *) alloca (replace_end
                                                   - replace_beg + 2);
                        *(replace++) = '%';
                        bcopy (replace_beg, replace,
                               replace_end - replace_beg);
                        replace[replace_end - replace_beg] = '\0';

                        /* Look for %.  Set the percent pointers properly
                           based on whether we find one or not.  */
			ppercent = find_percent (pattern);
			if (ppercent)
                          {
                            ++ppercent;
                            rpercent = 0;
                          }
			else
                          {
                            ppercent = pattern;
                            rpercent = replace;
                            --pattern;
                            --replace;
                          }

                        o = patsubst_expand (o, value, pattern, replace,
                                             ppercent, rpercent);

			if (v->recursive)
			  free (value);
		      }
		  }
	      }

	    if (colon == 0)
	      /* This is an ordinary variable reference.
		 Look up the value of the variable.  */
		o = reference_variable (o, beg, end - beg);

	  if (free_beg)
	    free (beg);
	  }
	  break;

	case '\0':
	  break;

	default:
	  if (isblank ((unsigned char)p[-1]))
	    break;

	  /* A $ followed by a random char is a variable reference:
	     $a is equivalent to $(a).  */
	  {
	    /* We could do the expanding here, but this way
	       avoids code repetition at a small performance cost.  */
	    char name[5];
	    name[0] = '$';
	    name[1] = '(';
	    name[2] = *p;
	    name[3] = ')';
	    name[4] = '\0';
	    p1 = allocated_variable_expand (name);
	    o = variable_buffer_output (o, p1, strlen (p1));
	    free (p1);
	  }

	  break;
	}

      if (*p == '\0')
	break;
      else
	++p;
    }

  if (save_char)
    string[length] = save_char;

  (void)variable_buffer_output (o, "", 1);
  return (variable_buffer + line_offset);
}

/* Scan LINE for variable references and expansion-function calls.
   Build in `variable_buffer' the result of expanding the references and calls.
   Return the address of the resulting string, which is null-terminated
   and is valid only until the next time this function is called.  */

char *
variable_expand (char *line)
{
  return variable_expand_string(NULL, line, (long)-1);
}

/* Expand an argument for an expansion function.
   The text starting at STR and ending at END is variable-expanded
   into a null-terminated string that is returned as the value.
   This is done without clobbering `variable_buffer' or the current
   variable-expansion that is in progress.  */

char *
expand_argument (const char *str, const char *end)
{
  char *tmp;

  if (str == end)
    return xstrdup("");

  if (!end || *end == '\0')
    return allocated_variable_expand ((char *)str);

  tmp = (char *) alloca (end - str + 1);
  bcopy (str, tmp, end - str);
  tmp[end - str] = '\0';

  return allocated_variable_expand (tmp);
}

/* Expand LINE for FILE.  Error messages refer to the file and line where
   FILE's commands were found.  Expansion uses FILE's variable set list.  */

char *
variable_expand_for_file (char *line, struct file *file)
{
  char *result;
  struct variable_set_list *save;

  if (file == 0)
    return variable_expand (line);

  save = current_variable_set_list;
  current_variable_set_list = file->variables;
  if (file->cmds && file->cmds->fileinfo.filenm)
    reading_file = &file->cmds->fileinfo;
  else
    reading_file = 0;
  result = variable_expand (line);
  current_variable_set_list = save;
  reading_file = 0;

  return result;
}

/* Like allocated_variable_expand, but for += target-specific variables.
   First recursively construct the variable value from its appended parts in
   any upper variable sets.  Then expand the resulting value.  */

static char *
variable_append (const char *name, unsigned int length,
                 const struct variable_set_list *set)
{
  const struct variable *v;
  char *buf = 0;

  /* If there's nothing left to check, return the empty buffer.  */
  if (!set)
    return initialize_variable_output ();

  /* Try to find the variable in this variable set.  */
  v = lookup_variable_in_set (name, length, set->set);

  /* If there isn't one, look to see if there's one in a set above us.  */
  if (!v)
    return variable_append (name, length, set->next);

  /* If this variable type is append, first get any upper values.
     If not, initialize the buffer.  */
  if (v->append)
    buf = variable_append (name, length, set->next);
  else
    buf = initialize_variable_output ();

  /* Append this value to the buffer, and return it.
     If we already have a value, first add a space.  */
  if (buf > variable_buffer)
    buf = variable_buffer_output (buf, " ", 1);

  return variable_buffer_output (buf, v->value, strlen (v->value));
}


static char *
allocated_variable_append (const struct variable *v)
{
  char *val, *retval;

  /* Construct the appended variable value.  */

  char *obuf = variable_buffer;
  unsigned int olen = variable_buffer_length;

  variable_buffer = 0;

  val = variable_append (v->name, strlen (v->name), current_variable_set_list);
  variable_buffer_output (val, "", 1);
  val = variable_buffer;

  variable_buffer = obuf;
  variable_buffer_length = olen;

  /* Now expand it and return that.  */

  retval = allocated_variable_expand (val);

  free (val);
  return retval;
}

/* Like variable_expand_for_file, but the returned string is malloc'd.
   This function is called a lot.  It wants to be efficient.  */

char *
allocated_variable_expand_for_file (char *line, struct file *file)
{
  char *value;

  char *obuf = variable_buffer;
  unsigned int olen = variable_buffer_length;

  variable_buffer = 0;

  value = variable_expand_for_file (line, file);

#if 0
  /* Waste a little memory and save time.  */
  value = xrealloc (value, strlen (value))
#endif

  variable_buffer = obuf;
  variable_buffer_length = olen;

  return value;
}

/* Install a new variable_buffer context, returning the current one for
   safe-keeping.  */

void
install_variable_buffer (char **bufp, unsigned int *lenp)
{
  *bufp = variable_buffer;
  *lenp = variable_buffer_length;

  variable_buffer = 0;
  initialize_variable_output ();
}

/* Restore a previously-saved variable_buffer setting (free the current one).
 */

void
restore_variable_buffer (char *buf, unsigned int len)
{
  free (variable_buffer);

  variable_buffer = buf;
  variable_buffer_length = len;
}