While displaying line numbers, show the relevant line number inside
the recipe not just the first line of the entire recipe.
Sample changes suggested by Brian Vandenberg <phantall@gmail.com>
* gnumake.h (gmk_floc): Add an 'offset' to track the recipe offset.
* read.c (eval, eval_makefile, eval_buffer): Initialize 'offset'.
(record_files, install_pattern_rule): Ditto.
* job.c (new_job, job_next_command): Update 'offset' based on the
line of the recipe we're expanding or invoking.
(child_error): Add 'offset' when showing the line number.
* function.c (func_shell_base): Ditto.
* output.c (error, fatal): Ditto.
* NEWS: Mention the new ability.
* tests/scripts/features/errors: Check the line number on errors.
* tests/scripts/functions/warning: Check the line number on warnings.
* tests/scripts/features/output-sync,
tests/scripts/features/parallelism, tests/scripts/functions/shell,
tests/scripts/functions/error: Update line numbers.
Previously if the jobserver was active, MAKEFLAGS would contain only
the -j option but not the number (not -j5 or whatever) so users
could not discover that value. Allow that value to be provided in
MAKEFLAGS without error but still give warnings if -jN is provided
on the command line if the jobserver is already activated.
* NEWS: Discuss the new behavior.
* os.h, posixos.c, w32/w32os.c: Return success/failure from
jobserver_setup() and jobserver_parse_auth().
* main.c (main): Separate the command line storage of job slots (now
in arg_job_slots) from the control storage (in job_slots). Make a
distinction between -jN flags read from MAKEFLAGS and those seen
on the command line: for the latter if the jobserver is enabled then
warn and disable it, as before.
* tests/scripts/features/jobserver: Add new testing.
* NEWS: Mention the change.
* main.c: Rename jobserver_fds variable to jobserver_auth and
--jobserver-fds option to --jobserver-auth.
* os.h, posixos.c, w32/w32os.c: Rename jobserver_parse_arg() and
jobserver_get_arg() to jobserver_parse_auth()/jobserver_get_auth().
* NEWS: Add information about reading files.
* make.texi (File Function): Describe reading files.
* tests/scripts/functions/file: Test new features for $(file ...)
Add a new variable .SHELLSTATUS which holds the exit status of the
last-invoked shell function or != assignment.
* NEWS, doc/make.texi: Document the change.
* function.c (shell_completed, msdos_openpipe, func_shell_base): Add
shell_completed() to handle the completion of the shell, by setting
.SHELLSTATUS. Call it where needed.
* job.c (child_handler): Call shell_completed().
* tests/scripts/functions/shell: Add tests for .SHELLSTATUS.
* configure.ac: Test for isatty() and ttyname()
* makeint.h: provide a substitute for ttyname() if it's not available.
* config.ami.template, config.h-vms.template, config.h.W32.template:
define/undefine HAVE_ISATTY/HAVE_TTYNAME macros.
* NEWS, doc/make.texi: Document these new variables.
Reported by Tim Murphy <tnmurphy@gmail.com>
* function.c (func_file): Only write TEXT if it is not NULL.
* NEWS, doc/make.texi: Document the new feature
* tests/scripts/functions/file: Verify that the no-text version of
$(file ...) works and doesn't add a newline.
Allows deprecated syntax. However we don't guarantee this syntax
will continue to be legal in the future.
Change suggested by David Boyce <david.s.boyce@gmail.com>
Create a new file, output.c, and collect functions that generate output there.
We introduce a new global context specifying where output should go (to stdout
or to a sync file), and the lowest level output generator chooses where to
write output based on that context.
This allows us to set the context globally, and all operations that write
output (including functions like $(info ...) etc.) will use it.
Removed the "--trace=dir" capability. It was too confusing. If you have
directory tracking enabled then output sync will print the enter/leave message
for each synchronized block. If you don't want that, disable directory
tracking.
This allows you to write portable makefiles that set GNU make-specific command
line options in the environment or makefile: add them to GNUMAKEFLAGS instead
of MAKEFLAGS and they will be seen by GNU make but ignored by other
implementations of make.
A new flag to the -O/--output-sync, "job", selects a per-job (that is, per
line of a recipe) output synchronization. To support this move the close of
the temp file out of the sync_output() function and don't do it until we free
the child, since we may call sync_output() multiple times in a given recipe.
When we set up for a new temp file, if we're in per-job mode we truncate the
file and seek to the beginning to re-use it for every job.
We fixed Savannah 16670 but that broke previously-working makefiles
that relied on the GNU make behavior. The POSIX behavior doesn't
seem to me to be better, and can be obtained using GNU make as well,
so put it back as the default behavior and require .POSIX to
get the POSIX behavior.
Add a new section to the manual discussing backslash/newline handling.
Update the test suite.
On configure-enabled systems, configure will detect Guile installed
(using pkg-config, which is how GNU Guile is distributed) and enable
it if so.
On all non-configure-enabled systems, currently, the default is for
Guile support to be disabled.
backward-incompatible change in the 2008 POSIX specification.
- Add the .SHELLFLAGS variable so people can choose their own shell flags.
- Add tests for this.
- Add documentation for this.
Allows the user to reset the prefix character for introducing recipe lines
from the default (tab) to any other single character, and back again.
Also, reworked the manual to consistently use the word "recipe" to describe
the set of commands we use to update a target, instead of the various
phrases used in the past: "commands", "command lines", "command scripts",
etc.
Update NEWS docs.
Enhance the manual to use automake version.texi, and use the canonical
FSF copyright features and statement.
Some $(realpath ...) tests won't work on Windows; leave them out
The jobserver filedescriptor test might fail if some FDs are reserved,
so for now comment out that check.
I decided this feature was too impacting to make the permanent default
behavior. This set of changes makes the default behavior of make the
old behavior (no second expansion). If you want second expansion, you
must define the .SECONDEXPANSION: special target before the first target
that needs it.
This set of changes ONLY fixes explicit and static pattern rules to work
like this. Implicit rules still have second expansion enabled all the
time: I'll work on that next.
Note that there is still a backward-incompatibility: now to get the old
SysV behavior using $$@ etc. in the prerequisites list you need to set
.SECONDEXPANSION: as well.
Taylor. There are two forms of this: first, it was possible to lose
tokens when using -j and -l at the same time, because waiting jobs were
not checked when determining whether any jobs were outstanding. Second,
if you had an exported recursive variable that contained a $(shell ...)
function there is a possibility to lose tokens, since a token was taken
but the child list was not updated until after the shell function was
complete.
To resolve this I introduced a new variable that counted the number of
tokens we have obtained, rather than checking whether there were any
children on the list. I also added some sanity checks to make sure we
weren't writing back too many or not enough tokens. And, the master
make will drain the token pipe before exiting and compare the count of
tokens at the end to what was written there at the beginning.
Also:
* Ensure a bug in the environment (missing "=") doesn't cause make to core.
* Rename the .DEFAULT_TARGET variable to .DEFAULT_GOAL, to match the
terminology in the documentation and other variables like MAKECMDGOALS.
* Add documentation of the .DEFAULT_GOAL special variable.
Still need to document the secondary expansion stuff...
* New function: $(info ...)
* Disallow $(eval ...) to create prereq relationships inside command scripts
(caused core dumps)
* Try to allow more tests to succeed in Windows/DOS by sanitizing CRLF and \
* Various bug fixes and code cleanups (see the ChangeLog entry)
- Apply a fix for the "thundering herd" problem when using "-j -l".
This also fixes bug #4693.
- Fix bug #7257: allow functions as ifdef arguments
- Fix bug #4518: make sure we print all double-colon rules with -p.
- Upgrade to autconf 2.58/automake 1.8/gettext 0.13.1
- Various doc cleanups, etc.
Fixed problems with the dist target (adding missing files).
Workaround for a bug in gettext 0.12.1 po/Makefile.in.in where distclean
wasn't cleaning everything, which caused distcheck to fail.
New version of the manual, put into the doc subdir.
Enhancements: $(eval ...) and $(value ...) functions, various bug
fixes, etc. See the ChangeLog.
More to come.
Fix an assert() in an obscure use of -q
Handling of double-colon timestamp updates was broken in a bizarre way.
Store arguments to $(call ...) functions in simple variables, not recursive
variables.
* A few tweaks to the system glob test, after trying it on a system where
it's true.
* Installed patches to archive handling for AIX 4.3 big archives.
* Fix a memory stomp in target-specific variables.
* Fix a memory leak in foreach functions.
