The consume function in both the read and write methods should consume
all the VolatileSlices that are given to it rather than just the first
one. The previous implementation was not wrong, just inefficient. This
should fix that.
Also add a test to make sure that this doesn't regress in the future.
BUG=none
TEST=unit tests
Change-Id: I02ec22269cdd6cdc329dd62367b99352a4dc1245
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1865271
Tested-by: Chirantan Ekbote <chirantan@chromium.org>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
It's quite costly to inject virtual interrupt to the guest, especially
in INTx case.
To reduce the number of interrupts, in process_rx(), we don't have to
inject interrupt on every frame, but wait until process_rx() finishes
processing all frames.
On eve, iperf3 gets ~15% improvement, "iperf3 -R" gets ~30% improvement.
BUG=chromium:854765
TEST=iperf3 on eve and Linux
Change-Id: Ie0560d8f42235d2371addb6de34c5f93d11a405f
Signed-off-by: Zide Chen <zide.chen@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1865021
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Commit-Queue: Stephen Barber <smbarber@chromium.org>
Tested-by: Stephen Barber <smbarber@chromium.org>
The audio_streams interface now supports specifying a sample format.
Update call sites to indicate that the desired format is S16LE.
BUG=chromium:1010667
TEST=aplay within vm
Cq-Depend: chromium:1856646
Change-Id: Ib69ff9b39196905f0f429eaf771f6f92901bfc71
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1856586
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Tested-by: Fletcher Woodruff <fletcherw@chromium.org>
Commit-Queue: Fletcher Woodruff <fletcherw@chromium.org>
Rather than using `use ::vhost::...` to disambiguate the imports, remove
the conflicting `use virtio_sys::vhost` and add `virtio_sys::` to each
location that used `vhost::...` previously.
The `use ::vhost::...` syntax confuses rustfmt when run directly on
these two files, causing it to rewrite the imports into something that
doesn't actually compile.
BUG=None
TEST=rustfmt --check devices/src/virtio/vhost/net.rs
TEST=rustfmt --check devices/src/virtio/vhost/vsock.rs
Change-Id: I8483f5327a1e2b3ae4887f0b3cef20a917d7410e
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1865370
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
This just removes a few extraneous blank lines that the new rustfmt
doesn't like.
BUG=None
TEST=bin/fmt --check
Change-Id: I4482f873bdfe19f2f73f86cfdd99d6cce873593c
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1863000
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Drop the dependency on libusb and reimplement the host USB backend using
usb_sys to wrap the Linux usbdevfs ioctls.
This allows sandboxing to work without any dependency on libusb patches,
and it gives us the flexibility to modify and update the USB backend
without depending on an external third-party library.
BUG=chromium:987833
TEST=`adb logcat` on nami with Nexus 5 attached
TEST=deploy app to phone with Android Studio
TEST=Run EdgeTPU USB accelerator demo (including DFU mode transition)
Cq-Depend: chromium:1773695
Change-Id: I4321c2b6142caac15f48f197795a37d59d268831
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1783601
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
crosvm doesn't support MSI/MSI-x, but kvmgt vgpu support MSI only
through cfg msi capability. This is a simple msi implementation, it
detects msi capability and track msi control, data and address info, then
call vfio kernel to enable / disable msi interrupt.
Currently it supports one vetor per MSI. It could extend to multi vetors and
MSI-x.
BUG=chromium:992270
TEST=none
Change-Id: I04fc95f23a07f9698237c014d9f909d011f447ef
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1581142
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Fix boxed_local, const_static_lifetime, useless_format, and
redundant_closure clippy warnings in the VFIO code.
This fixes all clippy warnings except a single instance of
let_and_return in VfioPciDevice::keep_fds(), since that code is modified
in an upcoming patch.
BUG=None
TEST=./build_test.py
TEST=bin/clippy
Change-Id: I548adbc6b92448fc0db82ed72214d73b0eabaf5c
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1822697
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Add the constants and struct definitions from the kernel fuse interface.
These bindings are manually generated from `include/uapi/linux/fuse.h`
in the kernel repo.
BUG=b:136128319
TEST=none; these aren't used anywhere yet
Change-Id: I03d11bc55eca6b8269f1e63a1187ef458ee16f28
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1705655
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
Refactor the Reader and Writer implementations for DescriptorChains.
This has several changes:
* Change the DescriptorChainConsumer to keep a
VecDeque<VolatileSlice> instead of an iterator. This delegates the
fiddly business of sub-slicing chunks of memory to the VolatileSlice
implementation.
* Read in the entire DescriptorChain once when the Reader or Writer is
first constructed. This allows us to validate the DescriptorChain
in the beginning rather than having to deal with an invalid
DescriptorChain in the middle of the device operating on it.
Combined with the check that enforces the ordering of read/write
descriptors in a previous change we can be sure that the entire
descriptor chain that we have copied in is valid.
* Add a new `split_at` method so that we can split the Reader/Writer
into multiple pieces, each responsible for reading/writing a
separate part of the DescriptorChain. This is particularly useful
for implementing zero-copy data transfer as we sometimes need to
write the data first and then update an earlier part of the buffer
with the number of bytes written.
* Stop caching the available bytes in the DescriptorChain. The
previous implementation iterated over the remaining descriptors in
the chain and then only updated the cached value. If a mis-behaving
guest then changed one of the later descriptors, the cached value
would no longer be valid.
* Check for integer overflow when calculating the number of bytes
available in the chain. A guest could fill a chain with five 1GB
descriptors and cause an integer overflow on a 32-bit machine.
This would previously crash the device process since we compile with
integer overflow checks enabled but it would be better to return an
error instead.
* Clean up the Read/Write impls. Having 2 different functions called
`read`, with different behavior is just confusing. Consolidate on
the Read/Write traits from `std::io`.
* Change the `read_to` and `write_from` functions to be generic over
types that implement `FileReadWriteVolatile` since we are not
allowed to assume that it's safe to call read or write on something
just because it implements `AsRawFd`. Also add `*at` variants that
read or write to a particular offset rather than the kernel offset.
* Change the callback passed to the `consume` function of
`DescriptorChainConsumer` to take a `&[VolatileSlice]` instead.
This way we can use the `*vectored` versions of some methods to
reduce the number of I/O syscalls we need to make.
* Change the `Result` types that are returned. Functions that perform
I/O return an `io::Result`. Functions that only work on guest
memory return a `guest_memory::Result`. This makes it easier to
inter-operate with the functions from `std::io`.
* Change some u64/u32 parameters to usize to avoid having to convert
back and forth between the two in various places.
BUG=b:136128319
TEST=unit tests
Change-Id: I15102f7b4035d66b5ce0891df42b656411e8279f
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1757240
Auto-Submit: Chirantan Ekbote <chirantan@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Write accessess cannot fail (in the CommandResult sense) and the result
did not carry any data, so remove the response from the Write command.
This should improve the speed of write requests for sandboxed devices.
For example, with the sandboxed serial device, boot time with a release
build of crosvm on my workstation goes from 1.7 seconds to 1.2 seconds,
measured by timing a boot with a missing init so that the kernel panics
and shuts down immediately.
BUG=None
TEST=time crosvm run -p init=bogus vm_kernel
Change-Id: I125bb831235ca741ae1cc6c86a02a5d863d1a211
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1853970
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
This change plumbs the jail throughout the arch specific device creation
process. It also adds a custom callback support for the ProxyDevice so
that the main process can interrupt the child serial process when it has
incoming bytes.
TEST=crosvm run
BUG=None
Change-Id: I6af7d2cb0acbba9bf42eaeeb294cee2bce4a1f36
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1752589
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Zach Reizner <zachr@chromium.org>
Commit-Queue: Zach Reizner <zachr@chromium.org>
- Send only one event while re-sampling.
- Don't sent event if the new sr is identical to the old one
This can reduce the rate to trigger the issue.
BUG=chromium:937977
TEST=Build and run lots of aplay and arecord in guest vm
Change-Id: Ibd21f363076c977ae256079e2615094b7ed2408b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1840752
Tested-by: Chih-Yang Hsia <paulhsia@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Commit-Queue: Chih-Yang Hsia <paulhsia@chromium.org>
Add error handling for adding/removing the tapfd to epoll.
We only remove the tap fd from the poll context if the tap is
readable, i.e. it would busy loop, so don't assume it's removed
from the poll context when there's a deferred rx frame.
BUG=chromium:1010742
TEST=arcvm network works
Change-Id: I84aab2dbe7ea31d724f04d3b3fb0a6916f232300
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1842399
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Chirantan Ekbote <chirantan@chromium.org>
Commit-Queue: Stephen Barber <smbarber@chromium.org>
Do not write to the irq_evt eventfd when interrupt_high is false; the
value written to the eventfd is ignored, so despite the '0' in the call,
this would re-trigger the interrupt even when it should not have been
asserted. Since ac97 is a PCI device, its interrupt is level triggered,
and re-asserting it on EOI is handled by the irq_resample_thread code.
BUG=None
TEST=`aplay /dev/urandom` from Crostini on nami
Change-Id: I6ad8e40b818e0495ad58b6902d88dd61103aed9d
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1838762
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Chih-Yang Hsia <paulhsia@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
The virtio spec requires that all read-only descriptors appear in the
chain before any write-only descriptors. Enforce this in the
`checked_new` function by adding a new `required_flags` parameter. The
`next_descriptor` function will set this to `VIRTQ_DESC_F_WRITE` if the
current descriptor is write-only. This ensures that once we see a
write-only descriptor, all following descriptors must be write-only.
BUG=b:136127316
TEST=none
Change-Id: Id8f942a4236a20f62f35439f3648dbec17e14c00
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1757239
Auto-Submit: Chirantan Ekbote <chirantan@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Commit-Queue: Chirantan Ekbote <chirantan@chromium.org>
If the guest is unable to return rx queue buffers to the device, we should
temporarily stop polling for reads on the tap fd. Otherwise, we'll spin and
burn CPU needlessly.
BUG=chromium:1010742
TEST=repro from b/141940546
Change-Id: Iac004e870779a8dd39004f44b44e17a2b45bcfa1
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1836914
Tested-by: Stephen Barber <smbarber@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: Stephen Barber <smbarber@chromium.org>
Convert the virtio pmem device to use the descriptor_utils Reader/Writer
helpers to simplify the code and allow support of arbitrary descriptor
layouts.
BUG=chromium:966258
TEST=./build_test.py
Change-Id: I9ccbdf2833980e4c44e19975f9091f9aea56c94b
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1811713
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Convert the virtio input device to use the descriptor_utils
Reader/Writer helpers to simplify the code and allow support of
arbitrary descriptor layouts.
BUG=chromium:966258
TEST=./build_test.py
Change-Id: Ia9272496dc59b29ea9cde9f6454099c881242d4c
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1811712
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Switching the devices to the new interface reduces code duplication and
will ease fuzzing the devices as they now have a common input and output
interface for descriptors.
BUG=chromium:966258
TEST=vm.CrostiniStartEverything
Change-Id: I823c04dfc24e017433f8e8ab167bbd5dfafd338b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1647371
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
For each guest memory region, setup the corresponding gpa to hva map
in the kernel vfio iommu table. Then the kernel vfio driver could
get the hpa through gpa. Device could use this gpa for dma also.
BUG=chromium:992270
TEST=none
Change-Id: I04008d68ab2ed182a789d6ee8c97a0ed9e1e4756
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1581141
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Create VFIO device and VFIO PCI device in create_devices() function, and
intergrate it into PciRootBridge, so guest could see this vfio device.
Add a vfio config parameter, this config point to passthrough or mdev
device sysfs path.
For passthrough case, first user unbind host device from its driver,
then bind host device to vfio-pci. Like:
echo 0000:00:02.0 > /sys/bus/pci/devices/0000:00:02.0/driver/unbind
ech0 8086 1912 > /sys/bus/pci/drivers/vfio-pci/new_id
Finally pass the sysfs to crosvm through
--vfio=/sys/bus/pci/devices/0000:00:02.0
For mdev case, user create a mdev device through
echo $UUID > mdev_type/create, then pass this mdev device to crosvm like
--vfio=/sys/bus/pci/devices/0000:00:02.0/$UUID
BUG=chromium:992270
TEST=none
Change-Id: I0f59d6e93f62f9ab0727ad3a867d204f4ff6ad2d
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1581140
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
In the same spirit as write_all() for the standard io::Write::write()
function, add a write_zeroes_all() function with a default
implementation that calls write_zeroes() in a loop until the requested
length is met. This will allow write_zeroes implementations that don't
necessarily fulfill the entire requested length.
BUG=None
TEST=cargo test -p sys_util write_zeroes
Change-Id: I0fc3a4b3fe8904946e253ab8a2687555b12657be
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1811466
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Cody Schuffelen <schuffelen@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Alloc::PciBar {..} is used as a key in the AddressAllocator's
hashmap, so inform the device about the pci bus/dev numbers.
BUG=chromium:924405
TEST=compile
Change-Id: Ib9d94e516269c1dc9a375c2ceb9775cf5a421156
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1811585
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Commit-Queue: Gurchetan Singh <gurchetansingh@chromium.org>
According to kernel Documents/vfio.txt and
Documents/vfio-mediated-device.txt,user pass host assigned
device or mdev to crosvm through --vfio parameter, vfio module
open this device and get this device's information.
Implement PciDevice trait on this device, then vfio_pci
module could trap guest pci cfg r/w and mmio r/w,
and transfer this operation into kernel vfio.
Currently the relationship of vfio container:group:device are
1:1:1, in the future it could extend to 1Ⓜ️n.
BUG=chromium:992270
TEST=none
Change-Id: I8006ef65022d56197eaeb464811a59db2ce54b9a
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1580458
Reviewed-by: Zach Reizner <zachr@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Switch to using Reader/Writer which allows buffers to be passed from
the guest as scatter gathers instead of requiring a single contiguous
buffer.
BUG=chromium:993452
TEST=apitrace replay
Change-Id: Ibe212cfa60eae16d70db248a2a619d272c13f540
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1775365
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: David Riley <davidriley@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: David Riley <davidriley@chromium.org>
Make sure all devices join any threads they spawn before returning from
the drop() handler after signaling the exit event.
BUG=chromium:992494
TEST=crosvm exits without errors
Change-Id: I6bc91c32a08f568b041765044caa9aff6f7cf4a9
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1802156
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
The new constructors are shorter and omit the bare `None` in the `anon`
call sites which gave no clues to the reader what the effect of that
`None` was. This should improve readability.
TEST=./build_test
BUG=None
Change-Id: I2e34e7df9a4ccc5da50edf4e963a6a42e3d84b22
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1797188
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: Zach Reizner <zachr@chromium.org>
Tested-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Rather than having a get_canceller() function on UsbTransfer, make the
submit function return the canceller. This makes it clear that the
transfer can't be cancelled before it is submitted.
BUG=None
TEST=None
Change-Id: Ice36c3096a1f8a5aafe93b5d5e27eb371183c19f
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1783599
Reviewed-by: Zach Reizner <zachr@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
This supports virtio disks that depend on multiple file descriptors. All
of the file descriptors are passed to the jail when relevant.
Bug: b/133432409
Change-Id: Idf2e24cd2984c0d12a47a523c13d24c1ba8d173e
Signed-off-by: Cody Schuffelen <schuffelen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1691761
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Use the standardized from_le_bytes() functions rather than the byteorder
crate.
BUG=None
TEST=./build_test
Change-Id: I07a062bf63c5d3ae1e25f403713bf9a1677e8cba
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1761155
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Use the stabilized standard to_le_bytes() and from_le_bytes() functions
rather than the byteorder crate.
BUG=None
TEST=./build_test
TEST=cargo test -p devices virtio_pci_common_config
Change-Id: I4106a41484760b9e7e586de07135874238bcadb0
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1761154
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Fix the last instance of this clippy warning:
warning: passing a unit value to a function
... and remove this warning from the "To be resolved" list in
bin/clippy.
BUG=None
TEST=bin/clippy passes without warnings
Change-Id: Ic1d558e935366d80eeadb96bf1ff951ce50edd5b
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1766623
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Tomasz Jeznach <tjeznach@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
By registering the notify address with Datamatch::AnyLength, KVM is able
to take advantage of KVM_FAST_MMIO_BUS to accelerate eventfd handling.
Seems this doesn't violate the virtio spec because "writing the 16-bit
virtqueue index" refers to the implementation of front-end driver, for
example, Linux's vp_notify() function. While how to handle the VQ index
write in VMM is not covererd by virtio spec. Here Crosvm ensures that
every VQ has dedicated notify address and KVM implements the notification
by eventfd, which should be fine with the spec.
On eve Pixelbook (R77 host kernel 4.4.185), in 5000 samples, on average
the MMIO write vmexit takes 0.96us with fast_mmio enabled, while it takes
3.36us without fast_mmio.
without fast_mmio:
232812.822491: kvm_exit: reason EPT_MISCONFIG rip 0xffffffff986f18ef info 0 0
232812.822492: kvm_emulate_insn: 0:ffffffff986f18ef:66 89 3e (prot64)
232812.822493: vcpu_match_mmio: gva 0xffffb0f4803a1004 gpa 0xe000f004 Write GPA
232812.822493: kvm_mmio: mmio write len 2 gpa 0xe000f004 val 0x1
232812.822495: kvm_entry: vcpu 1
with fast_mmio:
230585.034396: kvm_exit: reason EPT_MISCONFIG rip 0xffffffff9a6f18ef info 0 0
230585.034397: kvm_fast_mmio: fast mmio at gpa 0xe000f004
230585.034397: kvm_entry: vcpu 1
BUG=chromium:993488
TEST=Boot Crostini on eve and run iperf benchmark
TEST=Analysis kernel trace for vmexit handling time
Change-Id: Id1dac22b37490f7026b6c119c85ca9d104a8a3f4
Signed-off-by: Zide Chen <zide.chen@intel.corp-partner.google.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1762282
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
We always advertise VIRTIO_GPU_F_VIRGL and don't activate the
worker thread if Renderer::init fails. We're unlikely to
encounter an platform where we can initialize a GBM device, but
can't initialize virglrenderer.
Since our virtio-gpu implementation depends on virglrenderer, we can
pipe 2D hypercalls to virglrenderer (QEMU does this too, when built
with the --enable-virglrenderer option).
Also remove virgl_renderer_resource_info since it's unlikely to work
with non-Mesa drivers.
BUG=chromium:906811
TEST=kmscube renders correctly (though there's a prior bug in closing
the rendering window -- see chromium:991830)
Change-Id: I7851cd0837fd226f523f81c5b4a3389dc85f3e4f
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1743219
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Auto-Submit: Gurchetan Singh <gurchetansingh@chromium.org>
Now that we're not creating EGL images anymore, we can remove
EGL logic.
BUG=chromium:906811
TEST=freecad works without any local Mesa patches
Change-Id: I09db1c828ae1a331eaeae7c66653a49fe42a04bf
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1725451
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Gurchetan Singh <gurchetansingh@chromium.org>
Auto-Submit: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
With YUV support + modifier support coming up, it makes sense to
move GBM allocation inside virglrenderer so we can upstream
our use cases.
In addition, this allows us to use gbm_bo_map(..) for the freecad
issue, which would otherwise be resolved through local patches in
our graphics drivers.
BUG=chromium:906811
TEST=freecad works without Mesa patches
Change-Id: I61db5c58a5bc5a79fda3cec8ad6c322fae6acc9e
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1725450
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Commit-Queue: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Zach Reizner <zachr@chromium.org>
Auto-Submit: Gurchetan Singh <gurchetansingh@chromium.org>
Crosvm's AC97 device had code that was duplicated between playback and
capture stream creation. Abstract that code out so it can be shared.
BUG=chromium:968724
TEST=aplay /dev/urandom within container
Change-Id: If2fb50a0655656726dd9c6255bc84493e91c04e3
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1749948
Tested-by: Fletcher Woodruff <fletcherw@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Chih-Yang Hsia <paulhsia@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Commit-Queue: Fletcher Woodruff <fletcherw@chromium.org>
Add a new virtio configuration copying function to replace all of the
slightly varying read_config() and write_config() implementations in our
virtio devices. This replaces a lot of tricky bounds-checking code with
a single central implementation, simplifying the devices to a single
call to copy_config() in most cases.
The balloon device is also changed to represent its config space as a
DataInit struct to match most other devices and remove several unwrap()
calls.
BUG=None
TEST=./build_test
TEST=Boot vm_kernel+vm_rootfs in crosvm
TEST=Start Crostini on nami
Change-Id: Ia49bd6dbe609d17455b9562086bc0b24f327be3f
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1749562
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
We don't always shut down the worker threads cleanly, which can lead to a race
when crosvm is exiting. Worker threads that attempt logging to stderr may fail
an expect(), panic, and then panic again trying to write to stderr causing
SIGILL.
Work around this issue for now by using libc's exit, which won't run any
rust-specific cleanup.
BUG=chromium:978319,chromium:992494
TEST=crosvm shuts down without SIGILL/core dumps
Change-Id: I8a99ce8a34220afdf503402d44721a9bea5ec460
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1746830
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Daniel Verkamp <dverkamp@chromium.org>
Commit-Queue: Daniel Verkamp <dverkamp@chromium.org>
Rewrite the virtio block device to use the descriptor Reader/Writer
interfaces - this greatly simplifes the block device code.
This also lets the block device handle arbitrary descriptor layouts,
since the descriptor reader/writer handles that transparently for us.
BUG=chromium:990546
TEST=./build_test
TEST=Boot crosvm with vm_kernel+vm_rootfs on workstation
TEST=Boot full Crostini environment on nami
Change-Id: Ie9a2ba70a6c7ed0ae731660fd991fb88242e275f
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1721371
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Allow use of this helper function in other virtio devices that want to
write virtio descriptor chains as part of their tests.
BUG=chromium:990546
TEST=./build_test
Change-Id: Ib986646dc36b6406c88f20950586e1c665adf167
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/crosvm/+/1732851
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Tested-by: kokoro <noreply+kokoro@google.com>
