This appears to be a bit slower (1.170s -> 1.211s with "log -R git -r 'tags()'
-Tcommit_id --ignore-working-copy"), but seemed better than keeping growing
cache.
This improves `jj status` time by a factor of ~2x on my machine (M1 Macbook Pro 2021 16-inch, uses an SSD):
```sh
$ hyperfine --parameter-list hash before,after --parameter-list repo nixpkgs,gecko-dev --setup 'git checkout {hash} && cargo build --profile release-with-debug' --warmup 3 './target/release-with-debug/jj -R ../{repo} st'
Benchmark 1: ./target/release-with-debug/jj -R ../nixpkgs st (hash = before)
Time (mean ± σ): 1.640 s ± 0.019 s [User: 0.580 s, System: 1.044 s]
Range (min … max): 1.621 s … 1.673 s 10 runs
Benchmark 2: ./target/release-with-debug/jj -R ../nixpkgs st (hash = after)
Time (mean ± σ): 760.0 ms ± 5.4 ms [User: 812.9 ms, System: 2214.6 ms]
Range (min … max): 751.4 ms … 768.7 ms 10 runs
Benchmark 3: ./target/release-with-debug/jj -R ../gecko-dev st (hash = before)
Time (mean ± σ): 11.403 s ± 0.648 s [User: 4.546 s, System: 5.932 s]
Range (min … max): 10.553 s … 12.718 s 10 runs
Benchmark 4: ./target/release-with-debug/jj -R ../gecko-dev st (hash = after)
Time (mean ± σ): 5.974 s ± 0.028 s [User: 5.387 s, System: 11.959 s]
Range (min … max): 5.937 s … 6.024 s 10 runs
$ hyperfine --parameter-list repo nixpkgs,gecko-dev --warmup 3 'git -C ../{repo} status'
Benchmark 1: git -C ../nixpkgs status
Time (mean ± σ): 865.4 ms ± 8.4 ms [User: 119.4 ms, System: 1401.2 ms]
Range (min … max): 852.8 ms … 879.1 ms 10 runs
Benchmark 2: git -C ../gecko-dev status
Time (mean ± σ): 2.892 s ± 0.029 s [User: 0.458 s, System: 14.244 s]
Range (min … max): 2.837 s … 2.934 s 10 runs
```
Conclusions:
- ~2x improvement from previous `jj status` time.
- Slightly faster than Git on nixpkgs.
- Still 2x slower than Git on gecko-dev, not sure why.
For reference, Git's default number of threads is defined in the `online_cpus` function: ee48e70a82/thread-utils.c (L21-L66). We are using whatever the Rayon default is.
In preparation of traversing the filesystem in parallel, send updates via `channel`.
An alternative is to modify shared mutable state, e.g. put `self.file_states` behind a mutex or use a concurrent hash-map. This risks leaving the `TreeState` in an invalid state if an error occurs, and makes invariants harder to reason about.
Using a channel introduces a small performance regression. (I didn't try out the concurrent hash-map approach.)
```sh
$ hyperfine --parameter-list hash before,after --setup 'git checkout {hash} && cargo build --profile release-with-debug' --warmup 3 './target/release-with-debug/jj -R ../nixpkgs st'
Benchmark 1: ./target/release-with-debug/jj -R ../nixpkgs st (hash = before)
Time (mean ± σ): 1.533 s ± 0.013 s [User: 0.587 s, System: 0.926 s]
Range (min … max): 1.510 s … 1.559 s 10 runs
Benchmark 2: ./target/release-with-debug/jj -R ../nixpkgs st (hash = after)
Time (mean ± σ): 1.563 s ± 0.021 s [User: 0.607 s, System: 0.936 s]
Range (min … max): 1.518 s … 1.595 s 10 runs
Summary
./target/release-with-debug/jj -R ../nixpkgs st (hash = before) ran
1.02 ± 0.02 times faster than ./target/release-with-debug/jj -R ../nixpkgs st (hash = after)
```
This is basic implementation. There's no config knob to enable the external
diff command by default. It reuses the merge-tools table because that's how
external diff/merge commands are currently configured. We might want to
reorganize them in #1285.
If you run "jj diff --tool meld", GUI diff will open and jj will wait for
meld to quit. This also applies to "jj log -p". The "diff --tool gui" behavior
is somewhat useful, but "log -p --tool gui" wouldn't. We might want some flag
to mark the tool output can't be streamed.
Another thing to consider is tools that can't generate directory diffs. Git
executes ext-diff tool per file, but we don't. Difftastic can compare
directories, and doing that should be more efficient since diffs can be
computed in parallel (at the expense of unsorted output.)
Closes#1886
Puts the commit summary the working copy before the info about parent
commits, to match the output after most mutating commands.
Also puts the working copy diff before the commit summary, to keep it next to
the info about the working copy commit.
Include change id as well as (empty) and (conflict) markers in short commit
description.
Unlike `jj log`,
* (conflict) is put in parentheses to distinguish it from the commit
description when the output is not colored.
* the change id is placed right before the commit id to put it into a
predicteble place, even if the short commit description takes up more than one
line. The commit id can be important for commit descriptions in commands like
`abandon`.
`.gitignores` in ignored directories should be ignored. Before this
commit, we would visit ignored directories like any others if there
were any ignored paths in them.
I've done a lot of preparation for this commit, but There's still a
bit of duplication between the new code and the existing code. I don't
mind improving it if anyone has suggestions. Otherwise I might end up
doing that when I get back to working on snapshotting tree-level
conflicts soon.
This fixes#1785.
The `sub_path` is created by joining `dir` to a basename. I think
calling it just `path` is clear, especially since its the main path
involved in each iteration of the loop.
It's currently the same code path for handling changes to tracked
paths in ignored directories as outside ignored directories, but I'm
about to change that.
I also updated the assertion in the test to compare all entries
instead of just the tree id, so it's easier to spot errors if it
fails.
The `FileStateUpdate` enum now looks very similar to `Option`, so
let's just use that. I also renamed `get_updated_file_state()` to
`get_updated_tree_value()` since it returns a `TreeValue`.
We currently remove the file state for deleted files after walking the
working copy and noticing that the file is not there. However, in the
case of files that have been replaced by special files like Unix
sockets, we delete the file state inside the loop. Let's simplify a
tiny bit by not doing that.
We run a separate build on CI with the MSRV so we notice if we
accidentally break the MSRV. However, as we talked about on Discord,
the opposite is very unlikely - that we accidentally break the build
with the stable release without breaking the MSRV build. Also, we
explicitly run Clippy with the stable release, and formatting with the
nightly release. So, let's just do the regular build and tests with
the MSRV.
If we don't have a recorded state for a file, we assume that it's new,
so we add it to the tree as the type it appears on disk. That means we
won't check if it exists as a conflict in the current tree. As another
step towards making the file state just a cache, let's instead treat
this case as a dirty file, so we look up the current value from the
tree. That means that adding files will be a tiny bit slower, but I
doubt it will be noticeable (we need to read the file from disk and
write it to the backend anyway).
I want to replace the `DirEntry` argument to
`get_updated_file_state()` by a `PathBuf` and a `Metadata`. To avoid
always reading the metadata, we need to check for ignored files
outside of `get_updated_file_state()`. I also think that gives the
call site a nice symmetry in how we use the `git_ignore` for
directories (`.matches_all_files_in()`)) and files
(`.matches_file()`).
