Summary: This moves all dependencies across the jj-lib and jj-cli crates into
the top-level Cargo file; with that, we can change each crate instead to just
inherit the workspace version, with the toggled features enabled, by setting
a dependency such as:
dep.workspace = true
in the relevant Cargo.toml file.
This doesn't actually change any of the build semantics (from what I can tell)
nor the lockfile, and seems to respond normally. There are more cleanups that
can follow.
Two notes:
- Dependabot seems to work fine, based on what I've seen in other repos.
- `cargo add` doesn't seem to know how to add packages to a top-level
`workspace.dependencies` field; instead you can `cargo add -p jj-cli`
and move the entries, at least.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I307827e5f15c0d8ea8e2a80ec793d3c7
This is simpler than carefully tracking mutation through old/new git refs and
merged local branches. There are two subtle behavior changes:
a. unimported git refs excluded by git_ref_filter() are not pinned.
b. unexported branches are pinned (so fetched deletion doesn't abandon the
branch if it's referenced by another branch.)
I think (a) is okay (and even more correct) since such refs aren't known to jj
yet. (b) is desired.
Since .git/HEAD is less frequently updated, this should avoid unneeded
recompilation on test-only changes. This only applies to colocated repo.
For non-colocated repo, maybe we can watch src/ and ../lib/src files?
This also adds $NIX_JJ_GIT_HASH to reflect hash changes (and to not rerun
if no .git nor .jj directory exists.)
Since the recent move of `builds.rs` to `cli/build.rs`, incremental
builds re-calcuate the version number and thus result in some
re-compilation and lots of re-linking.
Summary: In preparation for unifying all workspace dependencies across all
crates, let's go ahead and move the jj-cli crate into its own new directory.
This will also be a nicer and more uniform layout as we add new `jj-*` crates.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: Icf94e7ae5f290dc8e181215727b38ada
Summary: mold apparently breaks linking to several external libraries, meaning
that the `jj` binary is useless as it can't load e.g. `libgit2.so` -- but
somehow I didn't catch it. Backout until a solution can be pinpointed. We can at
least give off a sigh of relief knowing that our link times aren't too bad yet.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Change-Id: I6e1851c339ddc72d32c201a44a7ddc49
This adds the `run` command as described in the doc.
The command is hidden for now, to allow in-tree development.
The next steps are:
1. Move it to `run.rs`
2. Find a good backend trait
3. Implement the workers
Initial progress on #1869 and #405
This could be a "ui.diff.format" variant, but we would need to solve namespace
problem by prefixing "tool:<name>" for example. Then, inlining command arguments
would become uglier.
#1886
This appears to be a bit slower (1.170s -> 1.211s with "log -R git -r 'tags()'
-Tcommit_id --ignore-working-copy"), but seemed better than keeping growing
cache.
This improves `jj status` time by a factor of ~2x on my machine (M1 Macbook Pro 2021 16-inch, uses an SSD):
```sh
$ hyperfine --parameter-list hash before,after --parameter-list repo nixpkgs,gecko-dev --setup 'git checkout {hash} && cargo build --profile release-with-debug' --warmup 3 './target/release-with-debug/jj -R ../{repo} st'
Benchmark 1: ./target/release-with-debug/jj -R ../nixpkgs st (hash = before)
Time (mean ± σ): 1.640 s ± 0.019 s [User: 0.580 s, System: 1.044 s]
Range (min … max): 1.621 s … 1.673 s 10 runs
Benchmark 2: ./target/release-with-debug/jj -R ../nixpkgs st (hash = after)
Time (mean ± σ): 760.0 ms ± 5.4 ms [User: 812.9 ms, System: 2214.6 ms]
Range (min … max): 751.4 ms … 768.7 ms 10 runs
Benchmark 3: ./target/release-with-debug/jj -R ../gecko-dev st (hash = before)
Time (mean ± σ): 11.403 s ± 0.648 s [User: 4.546 s, System: 5.932 s]
Range (min … max): 10.553 s … 12.718 s 10 runs
Benchmark 4: ./target/release-with-debug/jj -R ../gecko-dev st (hash = after)
Time (mean ± σ): 5.974 s ± 0.028 s [User: 5.387 s, System: 11.959 s]
Range (min … max): 5.937 s … 6.024 s 10 runs
$ hyperfine --parameter-list repo nixpkgs,gecko-dev --warmup 3 'git -C ../{repo} status'
Benchmark 1: git -C ../nixpkgs status
Time (mean ± σ): 865.4 ms ± 8.4 ms [User: 119.4 ms, System: 1401.2 ms]
Range (min … max): 852.8 ms … 879.1 ms 10 runs
Benchmark 2: git -C ../gecko-dev status
Time (mean ± σ): 2.892 s ± 0.029 s [User: 0.458 s, System: 14.244 s]
Range (min … max): 2.837 s … 2.934 s 10 runs
```
Conclusions:
- ~2x improvement from previous `jj status` time.
- Slightly faster than Git on nixpkgs.
- Still 2x slower than Git on gecko-dev, not sure why.
For reference, Git's default number of threads is defined in the `online_cpus` function: ee48e70a82/thread-utils.c (L21-L66). We are using whatever the Rayon default is.
In preparation of traversing the filesystem in parallel, send updates via `channel`.
An alternative is to modify shared mutable state, e.g. put `self.file_states` behind a mutex or use a concurrent hash-map. This risks leaving the `TreeState` in an invalid state if an error occurs, and makes invariants harder to reason about.
Using a channel introduces a small performance regression. (I didn't try out the concurrent hash-map approach.)
```sh
$ hyperfine --parameter-list hash before,after --setup 'git checkout {hash} && cargo build --profile release-with-debug' --warmup 3 './target/release-with-debug/jj -R ../nixpkgs st'
Benchmark 1: ./target/release-with-debug/jj -R ../nixpkgs st (hash = before)
Time (mean ± σ): 1.533 s ± 0.013 s [User: 0.587 s, System: 0.926 s]
Range (min … max): 1.510 s … 1.559 s 10 runs
Benchmark 2: ./target/release-with-debug/jj -R ../nixpkgs st (hash = after)
Time (mean ± σ): 1.563 s ± 0.021 s [User: 0.607 s, System: 0.936 s]
Range (min … max): 1.518 s … 1.595 s 10 runs
Summary
./target/release-with-debug/jj -R ../nixpkgs st (hash = before) ran
1.02 ± 0.02 times faster than ./target/release-with-debug/jj -R ../nixpkgs st (hash = after)
```
This is basic implementation. There's no config knob to enable the external
diff command by default. It reuses the merge-tools table because that's how
external diff/merge commands are currently configured. We might want to
reorganize them in #1285.
If you run "jj diff --tool meld", GUI diff will open and jj will wait for
meld to quit. This also applies to "jj log -p". The "diff --tool gui" behavior
is somewhat useful, but "log -p --tool gui" wouldn't. We might want some flag
to mark the tool output can't be streamed.
Another thing to consider is tools that can't generate directory diffs. Git
executes ext-diff tool per file, but we don't. Difftastic can compare
directories, and doing that should be more efficient since diffs can be
computed in parallel (at the expense of unsorted output.)
Closes#1886
Puts the commit summary the working copy before the info about parent
commits, to match the output after most mutating commands.
Also puts the working copy diff before the commit summary, to keep it next to
the info about the working copy commit.
Include change id as well as (empty) and (conflict) markers in short commit
description.
Unlike `jj log`,
* (conflict) is put in parentheses to distinguish it from the commit
description when the output is not colored.
* the change id is placed right before the commit id to put it into a
predicteble place, even if the short commit description takes up more than one
line. The commit id can be important for commit descriptions in commands like
`abandon`.
